Colorado

Colorado plumbing apprenticeships: Program Index

14 Colorado plumbing training programs, each read on its own website.

Checked against official sources on 2026-11-18

When to apply lists each program's application status.

An instructor brazes copper while apprentices watch at a training center

Plumbers Local 3 JATC (Denver)

Union (UA)Denver and northern Colorado. Counties listed: Adams, Arapahoe, Clear Creek, Denver, Douglas, Eagle, Elbert, Gilpin, Grand, Jackson, Jefferson, Kit Carson, Lake, Larimer, Lincoln, Logan, Morgan, Park, Phillips, Rio Blanco, Sedgwick, Washington, Weld, Yuma
Area
Denver and northern Colorado. Counties listed: Adams, Arapahoe, Clear Creek, Denver, Douglas, Eagle, Elbert, Gilpin, Grand, Jackson, Jefferson, Kit Carson, Lake, Larimer, Lincoln, Logan, Morgan, Park, Phillips, Rio Blanco, Sedgwick, Washington, Weld, Yuma
Requirements
At least 18; high school diploma or GED; valid driver license; physically able to perform all the work of the trade; minimum requirements on the SHL Prove It Assessment. Documents: application Form 1 and supplemental Form 1a, school transcripts, diploma or GED and scores, DD-214 if a veteran, proof of birth. Contractors require pre-employment and random drug testing.
How to apply
Apply online through the Apprenticeship Application Portal. After you submit, a confirmation email gives the SHL Prove It Assessment instructions, a link to the math exam and a link to the document upload portal. All documents must be uploaded within 31 days of submitting. Do not submit more than one application per year. Phone (303) 739-9100, Monday to Friday 7 a.m. to 4 p.m.
The Denver Plumbers Apprenticeship may include job opportunities with basic wages beginning at 50% of the Journeyman scale.

Read on the program's own site 2026-11-18: plumberslocal3.org/apprenticeship.aspx

UA Local 58 JATC (Colorado Springs)

Union (UA)El Paso, Teller, Cheyenne and parts of Kit Carson, Lincoln, Elbert, Douglas, Park, Alamosa, Baca, Bent, Chaffee, Conejos, Costilla, Crowley, Custer, Fremont, Huerfano, Kiowa, Las Animas, Mineral, Otero, Powers, Pueblo, Rio Grande and Saguache counties. Office and school at 2864 Janitell Road, Colorado Springs, CO 80906
Area
El Paso, Teller, Cheyenne and parts of Kit Carson, Lincoln, Elbert, Douglas, Park, Alamosa, Baca, Bent, Chaffee, Conejos, Costilla, Crowley, Custer, Fremont, Huerfano, Kiowa, Las Animas, Mineral, Otero, Powers, Pueblo, Rio Grande and Saguache counties. Office and school at 2864 Janitell Road, Colorado Springs, CO 80906
Length
5 years of on the job training and 5 years of classes at the JATC training center.
Classroom
Classes are in the evening twice a week; total classroom hours not stated.
Requirements
At least 18; high school graduate or GED. Submit diploma or GED with scores, original transcript, proof of age, work experience records if any, valid driver license and Social Security card; DD-214 for GI Bill. Must hold a current Colorado driver license and be insurable at standard rates.
How to apply
Fill out the online form at apply.appion.network/Start/uapl58, or apply in person at the Local 58 office 8 a.m. to 12 p.m. and 1 p.m. to 5 p.m. Monday to Friday (719) 473-9690.
The program consists of 5 years of on the job training and 5 years of attending classes at the J.A.T.C training center

Read on the program's own site 2026-11-18: local58.org/about-the-program/ · local58.org/how-to-apply/

UA Local 145 Western Slope JATC (Grand Junction)

Union (UA)Western Slope; training center at 3168 Pipe Court, Grand Junction, CO 81504
Area
Western Slope; training center at 3168 Pipe Court, Grand Junction, CO 81504
Length
Five years per the Western State College of Construction plumbing page, which lists a Grand Junction Plumber and Pipefitter Campus.
Classroom
Apprentices attend training totaling a minimum of 130 hours per semester.
How to apply
The page points to Applicants for Apprenticeship and Apprenticeship Forms on local145.org and gives the office phone 970-245-2012, front desk email on the page. The forms themselves were not read.
Prepares for
per the page: each apprentice has the ability to earn their Colorado Journeyman Plumbing License, plus medical gas, backflow, CPR, welding and rigging certifications.
Each apprentice has the ability to earn their Colorado Journeyman Plumbing License

Read on the program's own site 2026-11-18: local145.org/index.php/apprenticeship-upgrade-training/ · westernstatescollege.org/locations/grand-junction-campus/

Western State College of Construction

Union (UA)Plumber campuses in Colorado Springs, Denver and Grand Junction (and Cheyenne, Wyoming)
Area
Plumber campuses in Colorado Springs, Denver and Grand Junction (and Cheyenne, Wyoming)
Length
Plumbing is a five year program.
Classroom
About 246 hours per year of related instruction (so roughly 1,230 over five years if every year is the same); on the job learning is a minimum of 1,700 hours per year.
Cost
Estimated annual cost listed: tuition $0, fees $30 to $300, books and supplies and equipment $50 to $500 (no year stated).
How to apply
Use the Request More Information form on the page or contact the local JATC (Local 3, Local 58 or Local 145).
Plumbing is a five-year program. Students will receive a minimum of 1,700 hours per year of their on-the-job learning

Read on the program's own site 2026-11-18: westernstatescollege.org/plumbing/ · westernstatescollege.org/locations/grand-junction-campus/

CITC Plumbing Apprenticeship

CompanyDenver metro and Colorado Springs; CITC office 9901 W. 50th Ave, Wheat Ridge, CO 80033
Area
Denver metro and Colorado Springs; CITC office 9901 W. 50th Ave, Wheat Ridge, CO 80033
Length
Four years of classroom work (years 1 to 4, each 144 classroom hours and 2,000 on the job hours) totaling 8,000 on the job hours.
Classroom
576 hours of classroom instruction per the CITC page (144 per year for four years).
How to apply
Not given on the CITC plumbing page read; the Emily Griffith page lists CITC at 303-893-1500 and says to contact the apprenticeship team.
The program requires 576 hours of classroom instruction and 8000 hours of on-the-job training.

Read on the program's own site 2026-11-18: citcinc.org/apprenticeships/trades/plumbing/ · citcinc.org/apprenticeships/ · coloradophcc.org/technical-schools

Emily Griffith Technical College

CollegeDenver (Emily Griffith Technical College)
Area
Denver (Emily Griffith Technical College)
Length
Plumber apprenticeship programs typically last four to five years.
Requirements
Must be 18 or older with a high school diploma or GED and a valid driver license.
How to apply
Email the Emily Griffith apprenticeship team or use the Learn More form on the page.
Emily Griffith Technical College has partnered with a number of different unions and trade organizations to offer apprenticeship programs.

Read on the program's own site 2026-11-18: emilygriffith.edu/programs/plumber-apprenticeship/

RK Mechanical Apprenticeship

CompanyDenver area (RK Industries apprenticeship program)
Area
Denver area (RK Industries apprenticeship program)
Length
Multi-year. More than 8,000 hours of paid on the job training.
Classroom
More than 500 hours of classroom, laboratory and hands-on instruction.
Cost
RK covers 100 percent of apprenticeship tuition for apprentices who keep good grades and attendance; apprentices can earn up to 45 college credit hours toward an AAS degree.
How to apply
Choose a trade and apply online in the early summer, then interview 1 to 2 weeks later. Contact apprenticeship@rkindustries.com.
More than 8,000 hours of paid on-the-job training.

Read on the program's own site 2026-11-18: rkindustries.com/careers/apprenticeship-program/

Heating and Plumbing Engineers Apprenticeship

CompanyDenver and Colorado Springs (HPE office 407 W. Fillmore Place, Colorado Springs)
Area
Denver and Colorado Springs (HPE office 407 W. Fillmore Place, Colorado Springs)
Length
8,000 hours of on the job training.
Classroom
776 hours of classroom instruction (HPE page).
How to apply
Use the apply today button on the HPE page, or call the Colorado Springs office 719-633-5414.
8,000 hours of on-the-job training / 776 hours of classroom instruction

Read on the program's own site 2026-11-18: hpeinc.com/careers/apprenticeship-program

PHCC Colorado Academy (online)

PHCCOnline, statewide (Plumbing-Heating-Cooling Contractors Association of Colorado)
Area
Online, statewide (Plumbing-Heating-Cooling Contractors Association of Colorado)
Length
Four courses (Plumbing 101, 201, 301, 401); each course is the equivalent of one year of classroom instruction. On the job training must be arranged with an employer.
Cost
$1,495 for PHCC members and $1,895 for non-members, listed for these courses (the page does not say whether per course or for the series).
How to apply
Register through the Register Here link on the PHCC Colorado page.
PHCC Colorado is not responsible for tracking or verifying on-the-job hours.

Read on the program's own site 2026-11-18: coloradophcc.org/phcc-apprenticeship-academy · coloradophcc.org/technical-schools

PHCC Colorado Fast Track to Service Plumbing

PHCCOnline, statewide
Area
Online, statewide
Length
Most students finish in 12 to 18 months, studying at their own pace.
Classroom
More than thirty training modules; hours not stated.
Cost
$2,399 for PHCC Quality Service Contractor members, $2,899 for members, $3,299 for non-members.
Requirements
Aimed at employees of contractors who do plumbing service and repair work; computer and internet requirements listed.
How to apply
Register today through the link on the PHCC Colorado page; year-round open enrollment.
This course is meant to supplement on-the-job training.

Read on the program's own site 2026-11-18: coloradophcc.org/fast-track-to-service-plumbing-program

Red Rocks Community College

CollegeLakewood and Arvada (Red Rocks Community College)
Area
Lakewood and Arvada (Red Rocks Community College)
Length
Certificate; the plan of study PDF lists the Plumbing certificate at 18 credits.
Classroom
18 credit hours per the undated plan of study PDF.
Cost
Estimated tuition $2,342 for the 18 credit Plumbing certificate in the plan of study PDF (the PDF has no date).
How to apply
Apply to the college online (rrcc.edu/apply). For advising call 303-914-6306.
Prepares for
The 2026-2027 catalog says the certificate helps prepare plumbers for the state plumbing exams and that RRCC plumbing coursework can replace field experience, one classroom hour for one on the job hour, up to a maximum of one year.
one hour of classroom training equals one hour of on-the-job training up to a maximum of one year.

Read on the program's own site 2026-11-18: rrcc.smartcatalogiq.com/en/current/catalog/academic-programs · rrcc.edu/sites/default/files/career-technical-education-HVAC

Colorado Mesa University

CollegeColorado Mesa University / CMU Tech, Grand Junction
Area
Colorado Mesa University / CMU Tech, Grand Junction
Length
16 semester credit hours; the catalog shows a one semester plan of study grid.
Classroom
16 semester credit hours: PLMB 102 Plumbing Service and Repair (4), PLMB 104 International Plumbing Code (4), HVAC 103 Basic Electricity (3), HVAC 106 Introduction to Service Technician Training (1), HVAC 111 Piping Skills for HVAC (4).
How to apply
Apply through Colorado Mesa University admissions; the catalog page does not give steps.
allows the student to begin working in the plumbing industry as an apprentice

Read on the program's own site 2026-11-18: catalog.coloradomesa.edu/areas-study/hvac/plumbing-service-1

Pikes Peak State College (Fundamentals)

CollegeColorado Springs (Pikes Peak State College)
Area
Colorado Springs (Pikes Peak State College)
Length
21 credit hours: CON 1057 NCCER Core (5), CON 1066 NCCER Plumbing I (6), CON 1067 NCCER Plumbing II (6), PLU 2007 International Plumbing Code (4).
Classroom
21 credit hours.
How to apply
Apply through Pikes Peak State College admissions; the catalog page gives no steps.
introduces the NCCER Plumbing level one and level two fundamentals of plumbing trades

Read on the program's own site 2026-11-18: catalog.pikespeak.edu/programs/building-construction-technol

Pikes Peak State College (Advanced)

CollegeColorado Springs (Pikes Peak State College)
Area
Colorado Springs (Pikes Peak State College)
Length
22 credit hours: AEC 2660 Construction Safety and Loss Prevention (2), CON 1068 NCCER Plumbing III (6), CON 1069 NCCER Plumbing IV (6), PLU 2008 International Fuel Gas Code (4), PLU 2050 Plumbing Estimating and Costing (4).
Classroom
22 credit hours.
How to apply
Apply through Pikes Peak State College admissions; the catalog page gives no steps.
introduces the NCCER Plumbing level three and level four advanced skills for the plumbing trades

Read on the program's own site 2026-11-18: catalog.pikespeak.edu/programs/building-construction-technol

Undated pay is left out on purpose. If a program changed, its own site wins.