Texas

Journeyman Plumber license

The license most Texas plumbers work under. 8,000 hours, a 48 hour course, a written test and a hands on practical.

Checked against official sources on 2026-11-18

A plumber connects a water heater in a new house with the Dallas skyline in the distance
8,000Hours needed
48Training hours
100Written questions, 120 min
6Practical items, 240 min

Eligibility

  • Currently a registered apprentice or Tradesman in Texas, or a journeyman or master in another state.
  • At least 8,000 hours of experience under an RMP or a master licensed in another state.
  • The 48 hour course: two 6 hour CPE classes; the OSHA 10 Hour Outreach class (construction); 8 hours on residential codes (International Residential Code chapters); 18 hours on commercial plumbing codes, Texas Accessibility Standards and water conservation.
  • Fingerprints on file.

The 48 hour course is not required if you are in good standing in, or finished, a DOL registered apprenticeship, or hold a journeyman or master license from another state. Up to 1,000 of the 8,000 hours can be credited, on written request, for the classroom part of a DOL registered apprenticeship or approved training (22 TAC 363.5(c)). A registered apprentice with an Associate of Applied Science from a plumbing technology program approved by the board and the Texas Higher Education Coordinating Board may take the exam (22 TAC 363.5(d)).

The exam

Written: 100 questions in 120 minutes at a Pearson VUE center ($68.50). No books or notes in the room. Practical: 6 items in 240 minutes at the TSBPE center in Austin or Waco. Hands on shop work (measuring, cutting and joining solvent cemented PVC, soldered and brazed copper, threaded steel and compression band cast iron), spotting code violations on numbered water heater installs, and designing then building a two story drain, waste and vent system for up to 10 fixtures in a scale model.

Practical description from the TSBPE Journeyman Plumber Examination Review Course (November 2018 edition, also posted by Pearson VUE). A current Tradesman moving up takes only the written part; the practical is already done.

Full exam guide: codes, retakes, pass rate.

Fees

Exam application $40 to the TSBPE, first license $40, renewal $40 a year (late: $20 under 90 days, $40 over).

What a Journeyman may do

Installs, changes, repairs, services or renovates plumbing under a Responsible Master Plumber. May directly supervise apprentices on all jobs and Tradesmen on buildings other than one and two family dwellings. Journeymen can add the medical gas, water supply protection and residential sprinkler endorsements.

Taking the written exam? Journeyman Exam Prep has Texas law and code questions, timed runs at the real exam pace, and a study plan. See Exam Prep.

Sources: TSBPE journeyman page · TSBPE training programs · Pearson VUE handbook · TSBPE journeyman review course · Board rules 363.5, 363.22

Questions people ask

How long does it take to become a journeyman plumber in Texas?

You need 8,000 hours of supervised work, about four years full time. Up to 1,000 hours can be credited for the classroom part of an approved apprenticeship or approved training.

How many questions are on the Texas journeyman plumbing exam?

100 written questions in 120 minutes, then a 6 item practical in 240 minutes. You need 70% on each part.

What happens if I fail?

Wait 30 days after a first failure, 60 after a second and 90 after each one after that. One authorization covers up to five written attempts within a year. Fail the practical and you file a retest application for the practical only.

Can I take the exam with a license from another state?

Yes. A journeyman or master from another state may apply without the 48 hour course. Current Louisiana and Arkansas licensees may get a Texas license through reciprocity without an exam (Pearson VUE handbook, TSBPE reciprocal verification form).