Texas

Texas plumbing apprenticeships: Program Index

17 Texas plumbing training programs, each read on its own website. Open a row for length, cost, requirements and how to apply.

Checked against official sources on 2026-11-18

When to apply lists the application status for each one.

An instructor brazes copper while apprentices watch at a training center

Houston Area Plumbing JAC, UA Local 68

Union (UA)Houston, with Instructional Service Centers in Beaumont and Corpus Christi
Area
Houston, with Instructional Service Centers in Beaumont and Corpus Christi
Length
Five year plumbing apprenticeship (handbook revised 2025). Each training segment needs at least 1,700 hours of on the job learning.
Classroom
Each segment of training completes a minimum of 246 hours of related instruction.
Cost
Handbook states cost of attendance is approximately $12,000.00 per apprentice for the five year program, borne by signatory contractor training fund contributions; apprentices sign a Scholarship Loan Agreement tied to years of union work.
Requirements
At least 18 (a 17 year old may be considered if graduated, but must be 18 before indenture); high school diploma or GED; proof of birth date and education; DD-214 if claiming military credit.
How to apply
Applications are taken at the Training Center, 454 Link Rd, Houston, TX 77009, during announced application periods (handbook wording).
Prepares for
handbook says the path leads to UA journey worker status and Texas State Licensure, and requires apprentices to register with TSBPE as a Plumber Apprentice within the first six months of training.
Each segment of training completes a minimum of 246 hours of related instruction.

Read on the program's own site 2026-11-18: plu68.com/wp-content/uploads/Apprentice-Handbook-2025.pdf

UA Local 100 JATC (Dallas)

Union (UA)Dallas area, Local 100 jurisdiction (Training Center in Mesquite)
Area
Dallas area, Local 100 jurisdiction (Training Center in Mesquite)
Length
Five year apprenticeship. Page says apprentices must work at least 1,700 hours before the first wage increase.
Classroom
Total classroom hours not stated. Classes run end of August to mid May, two nights (possibly three) a week, 5:00 to 9:00 PM, some Saturdays possible.
Cost
Tuition and book fees covered by a $15.00 per week assessment deducted from each apprentice's paycheck. TSBPE apprentice card costs $15, paid to TSBPE.
Requirements
At least 18; physically able to perform the work; high school diploma or GED transcript; valid Texas driver's license; reliable transportation; live in the Local 100 jurisdiction; TSBPE Plumber's Apprentice card. Documents: birth certificate, official transcript, Social Security card, DD-214 if a veteran. No entrance test listed.
How to apply
Attend an orientation meeting for new applicants to receive an application packet; application pickup is in person at the Training Center, 3200 I-30 Frontage Rd, Mesquite, TX 75150, Wednesdays only (8:30 to 11:00 AM and 1:30 to 3:00 PM). Phone (214) 341-8606. An online apply link also exists.
Prepares for
Yes for the plumber track: apprentices must register as a plumber apprentice with TSBPE, and the Fourth Year Advanced Plumbing Code course is described as in preparation for the Texas State Journeyman Plumbing License.
Tuition and book fees are covered through a $15.00 per week assessment from each apprentice.

Read on the program's own site 2026-11-18: ualocal100.org/apprenticeship/ · ualocal100.org/become-a-plumber/ · ualocal100.org/application/

UA Local 142 JATC (San Antonio)

Union (UA)San Antonio area (office 3630 Belgium Ln, San Antonio, TX 78219)
Area
San Antonio area (office 3630 Belgium Ln, San Antonio, TX 78219)
Length
Five years.
Classroom
Evening classes two nights a week from September to May (total hours not stated). Trades taught: HVAC&R, pipefitting and plumbing.
Cost
Class tuition not stated. TSBPE Texas Plumbing Apprentice card costs $15.00 for all applicants.
Requirements
Minimum 18; certified birth certificate; high school diploma and sealed transcript or GED with sealed scores; DD-214 if military; photo ID; Selective Service registration for males under 26; must be able to obtain and keep a TSBPE Plumbers Apprentice card; service plumbing applicants need a valid driver's license and acceptable driving record.
How to apply
Apply in person at 3630 Belgium Lane, San Antonio, with all documents; an online application form also exists. Questions to the apprenticeship office, (210) 226-2661 ext. 218.
Our Apprenticeship program is for five years. During this time you learn while you are earning a living.

Read on the program's own site 2026-11-18: local142.org/apprenticeship.aspx · local142.org/apprenticeship-application.aspx

UA Local 146 JATC (Fort Worth)

Union (UA)Fort Worth area (9920 White Settlement Rd, Fort Worth, TX 76108)
Area
Fort Worth area (9920 White Settlement Rd, Fort Worth, TX 76108)
Length
Five year program.
How to apply
Contact the Local 146 JATC at (817) 534-5566; the New to the Trade page has an Apprenticeship Applications section. Pages name two different JATC directors (James Kline and Beau Burgess).
operates a college-accredited five-year apprenticeship training program for men and women who want to begin a career as a plumber

Read on the program's own site 2026-11-18: ualocal146.org/new-to-the-trade/ · ualocal146.org/careers/ · ualocal146.org/become-a-member/

UA Local 286 JATC (Austin)

Union (UA)Central Texas: Travis, Williamson, Hays, Bastrop, Caldwell, Blanco, Burnet, Llano, San Saba, Lampasas, Bell, Lee and Mason counties
Area
Central Texas: Travis, Williamson, Hays, Bastrop, Caldwell, Blanco, Burnet, Llano, San Saba, Lampasas, Bell, Lee and Mason counties
Length
Five years: 10,000 hours of on the job training, with a 1,000 hour try out probation.
Classroom
1,225 classroom hours, two four hour classes each week, Monday to Friday evenings.
Cost
Only expense stated is a minimal tuition fee once per year for classroom supplies (amount not given).
Requirements
At least 18; high school graduate or GED; valid driver's license or ID, Social Security card, birth certificate, service separation papers if applicable, copy of diploma and final transcript or GED and scores at application.
How to apply
Applications available online 24/7 from the apprenticeship page; qualified applicants are interviewed by the JATC and notified by certified mail. Training center phone 512.385.1817, 814 Airport Blvd, Austin, TX 78702.
(1) 10,000 hours of on-the-job training and (2) 1,225 hours of classroom instruction in subjects related to the trade.

Read on the program's own site 2026-11-18: local286.org/apprenticeship.aspx · local286.org/training.aspx · local286.org/

UA Local 404 JATC (Amarillo, Lubbock, Wichita Falls)

Union (UA)Texas Panhandle, South Plains and Wichita Falls area
Area
Texas Panhandle, South Plains and Wichita Falls area
Length
Five year college accredited program.
operates a college accredited five-year apprenticeship training program for men and women who want to begin a career as a plumber

Read on the program's own site 2026-11-18: ualocal404.org/apprenticeship/

PHCC San Antonio (St. Philip's Southwest Campus)

PHCCSan Antonio
Area
San Antonio
Length
Four academic years of classroom plus 8,000 on the job learning hours in DOL categories.
Classroom
640 hours total (160 hours per year); classes begin each September, twice a week 6 to 9 PM, September to June.
Cost
Tuition not stated; call (210) 824-7422 for current tuition and fees. Apprentice buys own hand tools.
Requirements
Apprentice must be sponsored and employed by a PHCC San Antonio contractor member; certified high school diploma or GED; TSBPE Apprentice Registration card; Social Security card and Texas driver's license; proof of Selective Service registration.
How to apply
Employer must sponsor: request an application from heather@phcc-sanantonio.org; employee application with Employer Acceptance Agreement and DOL Applicant Form.
Prepares for
the page says completion satisfies the TSBPE OSHA, code and education hours for Journeyman testing and reduces the work hours needed. It gives two different hour figures, so confirm the number with PHCC San Antonio.
Four academic years of Instruction (640 hours total)

Read on the program's own site 2026-11-18: phcc-sanantonio.org/content.aspx?page_id=22&club_id=610461&m · phcc-tx.org/page/APPRENTICESHIP

PHCC Texas Academy (online)

PHCCStatewide, online
Area
Statewide, online
Length
Four year online program, DOL recognized.
Classroom
Each course is the equivalent of one year of classroom instruction.
How to apply
Page links to a separate Online Apprenticeship Programs page (not read).
each course is the equivalent of one year of classroom instruction.

Read on the program's own site 2026-11-18: phcc-tx.org/page/APPRENTICESHIP

PHCC Texas and CEF of North Texas (Coppell)

PHCCDallas Fort Worth (Coppell)
Area
Dallas Fort Worth (Coppell)
Length
Four year curriculum, DOL approved. Graduates get an additional 1000 OJT hours toward licensing.
Classroom
PHCC page says classes are four times per year, one week each (also described as full day classes for four days every quarter). The CEF listing shows semester courses of 80 hours (17 sessions) per level, Plumbing I through IV.
Cost
CEF lists a $2,000.00 class fee per semester course (Plumbing I-A, I-B, II-B, III-B) plus required books and supplies (listed prices include $151 code book, $142 and $175 NCCER texts, $84 study companion, $20 calculator).
Requirements
CEF Plumbing I-A prerequisite: Applied Construction Math or TABE Math (or NCCER math test). Other entry requirements not stated.
How to apply
PHCC page links an application PDF for the next starting cohort and gives 512-523-8094. CEF registration is at ntcef.org, phone 972-574-5200.
Additional 1000 OJT hours granted to the student upon graduation.

Read on the program's own site 2026-11-18: phcc-tx.org/page/APPRENTICESHIP · ntcef.org/ProgramDetails?p=59&n=PLUMBING

ABC Central Texas

ABCAustin area, Central Texas
Area
Austin area, Central Texas
Length
Four years (Years to Complete: 4; Education: HS). First graduating plumbing class announced September 10, 2025.
Requirements
Education listed as HS (high school). Other requirements not stated.
How to apply
Use the Apply Now link on the registered apprenticeship page; apprentices are employed by a contractor from day one.
combining paid on-the-job experience with related technical instruction aligned to industry standards and Texas licensing requirements

Read on the program's own site 2026-11-18: abccentraltexas.org/registered-apprenticeship/ · abccentraltexas.org/abc-central-texas-celebrates-apprentices

ABC South Texas

ABCSan Antonio and South Texas
Area
San Antonio and South Texas
Length
Four years, Plumbing levels 1 to 4.
Classroom
Evening weeknight classes with NCCER based curriculum; total hours not stated.
Cost
Tuition for 2026 to 2027: $2,450 for member company employees, $2,825 for future members or non member companies. Books, tools and PPE may be extra.
Pay
Blog dated July 6, 2026 says apprentices often start at 50% of a journeyperson's wage (a percentage, no dollar figure).
Requirements
At least 18; high school transcript or GED; state driver's license or ID; verify work eligibility; Selective Service proof for males 18 to 26.
How to apply
Application, Selective Service verification, interview, obtain a sponsor employer, attend orientation. Contacts named on the education page.
Prepares for
page says completing the program satisfies the 24 hour Tradesman and 48 hour Journeyman classroom course requirements.
ABC South Texas classroom tuition is $2,450 for member company employees and $2,825 for future members

Read on the program's own site 2026-11-18: abcsouthtexas.org/education-training/ · abcsouthtexas.org/how-to-become-a-plumber-in-texas-abc-south

Craft Training Center of the Coastal Bend

ABCCorpus Christi and the Coastal Bend (7433 Leopard St, Corpus Christi, TX 78409)
Area
Corpus Christi and the Coastal Bend (7433 Leopard St, Corpus Christi, TX 78409)
Length
Four year DOL approved program.
How to apply
Email Janel Wilson at Jwilson@ctccb.org or call (361) 289-1636; page links an online application form.
The DOL approved 4 year Apprenticeship Training Programs allow students to receive paid, on-the-job training while simultaneously completing their coursework.

Read on the program's own site 2026-11-18: ctccb.org/programs/apprenticeship-programs · ctccb.org/plumbing

Houston City College, Plumbing Technician

CollegeHouston (Central Campus and South Campus)
Area
Houston (Central Campus and South Campus)
Length
160 minimum contact hours (continuing education award).
Classroom
160 contact hours in person.
Cost
Total program tuition $1,198.00, not including books or course materials; TPEG eligible.
How to apply
Use the Apply Now link on the program page; questions to cedu.constructiontrade@hccs.edu or 713-718-8932.
Course will prepare the individual for basic, entry-level employment position in the Plumbing industry.

Read on the program's own site 2026-11-18: hccs.edu/programs--courses/explore-all-programs/plumbing-tec

San Jacinto College, Plumbing Technology

CollegeHouston (North Campus)
Area
Houston (North Campus)
Length
16 credit hour occupational certificate, 4 months if full time.
Classroom
16 credit hours (contact hours not stated).
Cost
Tuition not stated on the page.
Requirements
No prior experience is required.
How to apply
Apply to San Jac through the college application link.
Prepares for
The page says it prepares you for the Texas Tradesman Plumber-Limited exam.
The program prepares you for the Texas Tradesman Plumber-Limited License exam.

Read on the program's own site 2026-11-18: sanjac.edu/programs/areas-of-study/manufacturing/plumbing/

St. Philip's College, Plumbing Trades

CollegeSan Antonio
Area
San Antonio
Length
60 credit hour degree over five semesters.
Classroom
60 credit hours (contact hours not stated).
Prepares for
graduates can take the Tradesman Plumbing License exam, per the catalog.
Students will also be able to take the examination for their Tradesman Plumbing License upon successful completion.

Read on the program's own site 2026-11-18: myspccatalog.alamo.edu/preview_program.php?catoid=298&poid=5

TSTC Plumbing and Pipefitting Technology

CollegeAbilene and Harlingen (new fall 2025); also offered at TSTC's original campus (not named on the page read)
Area
Abilene and Harlingen (new fall 2025); also offered at TSTC's original campus (not named on the page read)
Length
Associate degree (Journeyman track) and certificate (Tradesman track); lengths not shown on the pages read.
How to apply
Apply through tstc.edu; program page has Apply Now and Request Information links.
Prepares for
associate degree students will be eligible for the TSBPE Journeyman Plumber exam; certificate completers will qualify for the tradesman exam.
Students enrolled in the associate degree program will be eligible to take the Texas State Board of Plumbing Examiners' Journeyman Plumber licensing examination

Read on the program's own site 2026-11-18: tstc.edu/blog/2025/05/21/new-tstc-program-opens-doors-to-hig · tstc.edu/programs/plumbingpipefittingtechnology/

Texas Plumbing Careers (pre-apprenticeship)

OtherSan Antonio (4315 Centergate St, San Antonio, TX 78217)
Area
San Antonio (4315 Centergate St, San Antonio, TX 78217)
Length
Six week full time program, 240 hours of training, 8 students per cohort.
Classroom
240 hours of hands on training with classroom and code book time.
Cost
$0 tuition.
Pay
Page says participants are paid $13/hr during training in the 2026 cohorts (page lists a 2026 class schedule).
Requirements
No education, job experience or qualifications required, only commitment and work ethic.
How to apply
Apply with the online form linked from the site; phone (210) 201-5602.
No experience needed. Get paid $13/hr while you train for 6 weeks under a master plumber.

Read on the program's own site 2026-11-18: texasplumbingcareers.com/ · texasplumbingcareers.com/the-program

Undated pay figures are left out on purpose. If a program's details changed, its own site wins.

Questions people ask

What is the difference between a union and an open shop plumbing apprenticeship?

Union programs are run by United Association locals with contractors (a joint apprenticeship committee). Open shop programs run through contractor groups like PHCC or ABC. Both can be registered with the U.S. Department of Labor, which lets you skip the TSBPE 48 hour course.

Do Texas plumbing apprentices get paid?

Yes, apprentices work for a plumbing company and are paid while they learn. We list pay only where a program states a dated figure on its own site.

Does a registered apprenticeship replace the 48 hour course?

Yes. Board rule 363.5(e) exempts apprentices enrolled in good standing in a DOL registered program, and up to 1,000 hours of classroom credit can be requested in writing.