Louisiana

Louisiana plumbing apprenticeships: Program Index

7 Louisiana plumbing training programs, each read on its own website.

Checked against official sources on 2026-11-18

When to apply lists each program's application status.

An instructor brazes copper while apprentices watch at a training center
Louisiana plumbing licensing changes on January 1, 2027. Act 908 of 2026 abolishes the State Plumbing Board and moves plumbing licensing to the Louisiana State Licensing Board for Contractors on January 1, 2027. Licenses held on December 31, 2026 carry over as the equivalent new license. Under the Act, a journeyman needs 2,500 hours of verified apprentice work plus a written and a practical exam. The new board had not published its rules or exam details when we checked, so the hours, fees and exam facts below are the State Plumbing Board rules in force through December 31, 2026. Act 908 of 2026 (HB 953)

UA Local 60 (New Orleans)

Union (UA)Greater New Orleans (Local 60); the same page lists UA locals in Lake Charles, Monroe, Baton Rouge, Shreveport and Alexandria
Area
Greater New Orleans (Local 60); the same page lists UA locals in Lake Charles, Monroe, Baton Rouge, Shreveport and Alexandria
Length
Five years, classroom instruction two nights per week, two semesters per year, plus on the job training.
Cost
The page says all apprentices receive free related instruction for the five years at the Local 60 Training Center. No tuition amount stated.
Requirements
At least 18 years of age; high school diploma or GED; valid driver license; reliable transportation; drug free. Knowledge of general science, chemistry, physics, general math, algebra and geometry helps.
How to apply
Download the New Orleans Pipe Trades preliminary application and hand deliver or mail it to New Orleans Pipe Trades, 2541 N. Arnoult Rd., Suite 122, Metairie, LA 70002. Questions: Joann Theriot, jtheriot@local60.com, 504-885-8033.
Upon successful completion of the five-year program, the Apprentices become Journeyman as Plumbers, Pipefitters, or HVACR Service Technicians.

Read on the program's own site 2026-11-18: ualocal60.org/training/new-orleans-pipe-trades/ · ualocal60.org/training-2/ · ualocal60.org/

UA Local 198 (Baton Rouge)

Union (UA)Baton Rouge (Apprenticeship East) and Lake Charles (Apprenticeship West)
Area
Baton Rouge (Apprenticeship East) and Lake Charles (Apprenticeship West)
Length
Five year apprenticeship program (school).
Cost
A $25 application fee (cash or check only). Tuition not stated.
Requirements
At least age 18 and a high school education or equivalent.
How to apply
Apply in person at the Apprenticeship School or the Union Hall with a birth certificate, Social Security card, current driver license, high school diploma and transcript or GED certificate, and the $25 fee. Training centers: 5355 Greenwell St., Baton Rouge, LA 70805 and 5432 Broad Street, Lake Charles, LA 70615. Call 225-355-9938 (Baton Rouge) or 337-436-4373 (Lake Charles).
To apply for the program, you must apply in person at the Apprenticeship School or Union Hall.

Read on the program's own site 2026-11-18: local198.org/apprenticeship/ · local198.org/

PHCC Louisiana Apprenticeship

PHCCStatewide by eLearning (PHCC Academy); in person school in Shreveport through the Northwest Louisiana Chapter; Baton Rouge office
Area
Statewide by eLearning (PHCC Academy); in person school in Shreveport through the Northwest Louisiana Chapter; Baton Rouge office
Length
3.5 years: 7,000 on the job training hours (effective January 2024) plus 576 classroom hours (42 per enrollment period).
Classroom
576
Cost
Tuition including textbook is $1,800 per year, billed $450 per enrollment period. Extras: $50 late application fee, $50 late employer re-enrollment, $25 per 30 days late tuition, $95 replacement textbook, $300 for a 60 day eLearning extension.
Requirements
Employed on payroll by a regular or affiliate PHCCLA member; at least 16 years old at application; physically able to do the work; high school diploma or GED recommended but not required; essential skills test score of at least 70 percent. Up to 3,500 hours of credit for prior plumbing experience with an employer recommendation letter and proof of hours.
How to apply
Applications go through the apprentice employer, who must be a current PHCCLA member in good standing, on the PHCCLA website or the fillable form, with the employer enrollment form and sponsor employer agreement. An essential skills test is part of the application. Questions: (225) 343-2776.
The apprenticeship prgram is now a 3.5-year program, inclusive of 576 classroom hours and 7,000 on-the-job-training (OJT) hours.

Read on the program's own site 2026-11-18: laphcc.org/page/apprenticeship · cdn.ymaws.com/www.laphcc.org/resource/resmgr/apprenticeship/

PHCC Louisiana Apprenticeship

CollegeBaton Rouge (Acadian campus classes; Capital City Construction Lab on the Mid City campus)
Area
Baton Rouge (Acadian campus classes; Capital City Construction Lab on the Mid City campus)
Length
222 classroom hours and 3,500 on the job training hours.
Classroom
222
Cost
The press release says the total cost to enroll from beginning to end is $1,500.
How to apply
Non-credit course; request information from jacksonn@mybrcc.edu (course page) or contact the Dean of Technical Education Heather Guidry, guidryh@mybrcc.edu (press release). On the job hours are with a journeyman plumber through PHCC Louisiana.
To complete the program, students must finish 222 classroom hours and 3,500 on-the-job training hours.

Read on the program's own site 2026-11-18: mybrcc.edu/workforce-solutions/course-detail.php?id=386 · mybrcc.edu/news/plumbing.php

Northwest Louisiana Technical Community College

CollegeShreveport campus
Area
Shreveport campus
Length
48 credit hour technical diploma, plus 4,000 apprenticeship hours before the Tradesman license test; a Plumbing year III and IV Workforce Program covers the remaining 4,000 hours toward the journeyman test.
Classroom
48 credit hours (clock hours not stated).
How to apply
Apply online or request information through the NLTCC plumbing page; the program runs at the Shreveport campus.
graduates will be eligible to take the Tradesman license test.

Read on the program's own site 2026-11-18: nltcc.edu/academics/plumbing

SOWELA Technical Community College

CollegeLake Charles
Area
Lake Charles
Length
50 semester credit hours (750 total clock hours), offered as a certificate of technical competency (10 credits), certificate of technical studies (25) and technical diploma (50).
Classroom
750 clock hours (50 credit hours)
How to apply
Use the Apply Now link on the program page. Contacts: Jonathan Darbonne, Associate Dean, jonathan.darbonne@sowela.edu, (337) 421-6961; Chelsey Johnson, (337) 421-6992.
a 50 credit hour program for plumbers and steamfitters apprentices

Read on the program's own site 2026-11-18: sowela.edu/programs/tat/plumbing-construction/

ABC New Orleans/Bayou Chapter

ABCNew Orleans area (ABC Bayou Chapter)
Area
New Orleans area (ABC Bayou Chapter)
Length
A 2 to 4 year program with 2,000 on the job training hours per year plus classroom work, competency based with NCCER courses.
Requirements
Must work for a participating ABC member company.
How to apply
You must be working for a member company that participates in the Apprenticeship Program; the page sends readers to the Department of Labor website and an Apprenticeship Contact form. The campus offers training in Electrical in the fall and says other crafts are available off campus.
In order to become a Registered Apprentice, you MUST be working for a member company that participates in the Apprenticeship Program.

Read on the program's own site 2026-11-18: abcbayou.com/Education/Apprenticeship · abcbayou.com/

Undated pay is left out on purpose. If a program changed, its own site wins.