Michigan

Michigan plumbing apprenticeships: Program Index

16 Michigan plumbing training programs, each read on its own website.

Checked against official sources on 2026-11-18

When to apply lists each program's application status.

An instructor brazes copper while apprentices watch at a training center

UA Local 98 and MCA Detroit

Union (UA)Metro Detroit and Southeastern Michigan
Area
Metro Detroit and Southeastern Michigan
Length
5 year apprenticeship with 10,000 hours of on the job training and related classroom instruction.
Classroom
School one day every other week; total classroom hours not stated.
Cost
Apprentice buys books and normal school supplies. No tuition amount stated. The page says apprentices obtain an Associate Degree through Washtenaw Community College in partnership with the program.
Requirements
At least 18 when starting class; valid driver license; official high school diploma, transcript or GED; WorkKeys within 2 years at Applied Mathematics Level 6, Locating Information Level 5, Reading for Information Level 5; Wiesen Test of Mechanical Aptitude raw score of 48; drug free.
How to apply
Create an online account, complete the online application, upload diploma or GED with the official test report and driver license, then take the WorkKeys test (Macomb Community College or Schoolcraft College schedule it) and upload the results.
Prepares for
Apprentices must obtain and keep their Michigan plumber apprentice registration and work under a journey or master plumber, and the page describes the licensed Michigan plumber trade.
Obtain and maintain registration as a plumber apprentice with the State of Michigan.

Read on the program's own site 2026-11-18: plumbers98tc.org/apprenticeship

UA Local 85 (Saginaw area)

Union (UA)Saginaw, Bay, Midland and Traverse City area (about 30 northern lower peninsula counties listed on the page)
Area
Saginaw, Bay, Midland and Traverse City area (about 30 northern lower peninsula counties listed on the page)
Length
5 years, first year probationary.
Classroom
One day every other week in Saginaw or Traverse City; total hours not stated.
Cost
Apprentice buys text material for the classes. No tuition amount stated.
Requirements
18 at time of application; United States citizen; live in the Local 85 county jurisdiction; high school diploma or GED; good moral character and physically able; valid Michigan driver license and dependable transportation; pass a scheduled general knowledge aptitude exam; interview; drug testing.
How to apply
Online application form, or pick one up at UA Local 85, 3535 Bay Road, Saginaw, MI 48603 (8:00 to 5:00 business days). Return it with diploma or GED, driver license or birth certificate, and DD-214 if applicable. Phone (989) 799-5261.
Apprenticeship is 5 years long, with the first year considered probationary.

Read on the program's own site 2026-11-18: ualocal85.org/apprenticeships/

UA Local 190 (Ann Arbor)

Union (UA)Ann Arbor and Greater Michigan, Local 190 jurisdiction (counties not read)
Area
Ann Arbor and Greater Michigan, Local 190 jurisdiction (counties not read)
Length
5 year apprenticeship; must obtain 1,500 to 2,000 on the job hours per year.
Classroom
Apprentices who start after January 1, 2025 attend 8 hours every other week; an older line on the page says 1 to 2 nights per week in 3 to 15 week segments. Total not stated.
Cost
$75 non-refundable application fee. Associate of Applied Science degree through Washtenaw Community College is part of the path; its cost is not stated.
Requirements
Pass a drug test; consent to a background check; valid driving license; high school graduate or GED. Documents: birth certificate, Social Security card, driver license, diploma and transcripts or GED report, college transcripts if any, DD-214 if any. WorkKeys covers Applied Math, Workplace Documents, Workplace Observation and Applied Technology.
How to apply
Fill out the online application, pay the fee, then take the WorkKeys exam on the date, time and place mailed and emailed to you. Training Coordinator Colin Krasny, (734) 426-3700.
Yes, there is a $75 non-refundable application fee.

Read on the program's own site 2026-11-18: ua190.org/training · ua190.org/apprenticeship.aspx · ua190.org/apprenticeship-faq.aspx

UA Local 333 (Lansing and Jackson)

Union (UA)Lansing and Jackson training centers
Area
Lansing and Jackson training centers
Length
5 year program; 9,000 hours of on the job training and 1,000 hours of classroom instruction (FAQ elsewhere on the same page says 8,000 training hours and 1,080 school hours).
Classroom
1 eight hour day every two weeks, 84 hours per period, 168 hours per year for 5 years. Page states 1,000 total in one place and 1,080 in another.
Cost
Described as tuition free; text material is provided free of charge.
Requirements
Requirements are on a separate page that was not shown in the text read.
How to apply
Online application on the Local 333 site.
Your on-the-job hours will work towards getting a state plumbing license.

Read on the program's own site 2026-11-18: ua333.org/apprenticeship/ · ua333.org/

UA Local 357 (Southwest Michigan)

Union (UA)Allegan, Barry, Berrien, Cass, Kalamazoo, St. Joseph and Van Buren counties; classes in Schoolcraft
Area
Allegan, Barry, Berrien, Cass, Kalamazoo, St. Joseph and Van Buren counties; classes in Schoolcraft
Requirements
18 with a high school diploma or GED, or 17 and a senior on track to graduate that year; proof of birth date (driver license and birth certificate); official transcripts; DD-214 if applicable; willing to work full time in the listed counties and attend class in Schoolcraft; background investigation (federal criminal history, credit, driving record).
How to apply
Online application with uploaded documents, then an in-person computer assessment of about 60 to 90 minutes (scheduling may take several months), then an interview. Local 357, 11847 Shaver Rd, Schoolcraft, MI 49087, (269) 679-2570.
Applicants must be willing to work full time in any part of the following counties.

Read on the program's own site 2026-11-18: ualocal357.com/apprenticeship-program

UA Local 370 (Flint area)

Union (UA)Genesee, Shiawassee and Lapeer counties
Area
Genesee, Shiawassee and Lapeer counties
Length
5 year program registered with the US Department of Labor, 8,500 to 10,000 on the job hours including a 1 year probationary period.
Classroom
Minimum of 246 hours of related classroom instruction per year; one eight hour class every two weeks.
Cost
Apprentices purchase required text material. No tuition amount stated.
Requirements
Able to pass a drug test; valid driver license; high school graduate or GED; proof of residency in Genesee, Shiawassee or Lapeer County; all documents or the application is dropped.
How to apply
Online application with birth certificate, diploma or GED, transcripts, WorkKeys results (Workplace Documents, Graphic Literacy, Applied Math at GST Michigan Works) and DD-214 if any. Interviews follow the window.
The next UA Local 370 Application Window will open January 2nd, 2027.

Read on the program's own site 2026-11-18: ualocal370.org/apprenticeship/

UA Local 111 (Upper Peninsula)

Union (UA)Michigan Upper Peninsula (and Niagara, Wisconsin)
Area
Michigan Upper Peninsula (and Niagara, Wisconsin)
Length
5 year program combining paid on the job training with classroom instruction.
Classroom
216 hours of classroom training each year.
Cost
WorkKeys testing fee is $24; apprentices pay for each retake.
Requirements
At least 17 to apply; at least 18 with a high school diploma or equivalent to enter; background check; drug and alcohol screening; ACT WorkKeys in Graphic Literacy, Workplace Documents and Applied Mathematics with a combined average of Level 5.33 and 80 percent correct.
How to apply
When applications reopen, apply through a designated U.P. Michigan Works service center. Training Coordinator John Antoncew, (906) 789-9784 ext. 3.
Applications Are Not Currently Being Accepted

Read on the program's own site 2026-11-18: lu111.com/apprenticeship-program/

UA Local 174 (West Michigan)

Union (UA)West Michigan, training center in Coopersville
Area
West Michigan, training center in Coopersville
How to apply
Fill out the information sheet (not an application) and the Local emails you when applications open. 1008 O'Malley Drive, Coopersville, MI 49404, 616-837-0222.
We accept applications every February.

Read on the program's own site 2026-11-18: ua174.org/ · ua174.org/i-dont-have-field-experience-in-the-piping-industr

UA Local 671 (Monroe)

Union (UA)Monroe, Michigan hall
Area
Monroe, Michigan hall
How to apply
Contact the hall at 309 Detroit Ave, Monroe, MI 48162, (734) 242-5711.
A Michigan licensed plumber is responsible for the installation of a system of pipes.

Read on the program's own site 2026-11-18: unitedassociationlocal671.com/apprenticeship/

Greater Michigan Construction Academy (ABC)

ABCMidland, Saginaw and Lansing
Area
Midland, Saginaw and Lansing
Length
Plumbing is listed at 576 total clock hours in 4 levels (Plumbing 1 to 4).
Classroom
576 clock hours.
Cost
Tuition $2,204 per semester plus a book fee of $70 to $265 that varies by trade and a lab fee of $132 for each plumbing level. Refund: 100 percent before the second class.
How to apply
Complete the GMCA enrollment form online and pick the trade and site.
Take part in the 4-session Journeyman Plumber Prep Course.

Read on the program's own site 2026-11-18: gmcami.org/carpentry-electrical-plumbing-ironworking-pipefit · gmcami.org/journeyman-plumbing-course/ · abcmi.com/Training-Safety/Training-Partners

West Michigan Construction Institute (ABC)

ABCGrand Rapids area
Area
Grand Rapids area
Length
Plumbing 1 is the first level of a three level program. Fall entry runs August 17, 2026 to May 10, 2027; accelerated spring entry runs January 11 to May 13, 2027.
Classroom
Mondays 4:30 to 8:30 PM in the fall (2 semesters); Mondays and Thursdays in the spring (1 semester).
Cost
Total $4,569: tuition $4,120, lab fee $175, textbook $175, tech fee $99.
How to apply
Registration closed; join the WMCI waitlist on the course page.
Plumbing 1 prepares learners for entry-level work in the plumbing trade.

Read on the program's own site 2026-11-18: wmcinstitute.com/course/plumbing-1/ · abcmi.com/Training-Safety/Training-Partners

Allied Mechanical Services

CompanyKalamazoo and Grand Rapids, Michigan
Area
Kalamazoo and Grand Rapids, Michigan
Length
4 year paid program, Department of Labor certified, established in 2004.
Classroom
9 classes per year, one a month from September to May, paid at regular rates; NCCER curriculum. Total hours not stated.
Cost
Textbooks and materials provided at no cost to apprentices.
How to apply
Apply through the Apply Here link on the program page; apprentices work on Allied job sites.
A paid, four-year program that develops apprentices in both the plumbing and pipefitting trades.

Read on the program's own site 2026-11-18: alliedmechanical.com/apprenticeship/ · alliedmechanical.com/

Macomb Community College

CollegeMacomb County (Center Campus, Clinton Township area)
Area
Macomb County (Center Campus, Clinton Township area)
How to apply
Get Started or Ask Admissions on the page; Department of Engineering and Advanced Technology, 586.445.7435.
qualify for an employer-sponsored apprenticeship

Read on the program's own site 2026-11-18: macomb.edu/programs-courses/programs/plumbing-pipe-fitting.h

Henry Ford College

CollegeDearborn, Michigan
Area
Dearborn, Michigan
Length
39 minimum credits for completion, 2.000 GPA; the requirement list shows 36 credits of plumbing courses.
Classroom
Credits only; includes PLMB250 Plumbing Pipefitting Code and PLMB275 Practical Plumbing Lab State License Prep.
Cost
Eligible for financial aid; tuition not stated on the catalog page.
How to apply
Faculty contact Chad Richert, 313-317-1515; advisor Rachel Vanzutphen, 313-845-9873.
Prepares for
The catalog says it prepares students for the State of Michigan plumbing licensure pathway with formal instruction, labs and registered apprenticeship experience with licensed plumbing contractors.
Prepares students for the State of Michigan plumbing licensure pathway.

Read on the program's own site 2026-11-18: catalog.hfcc.edu/programs/RESPLUMB.CA · catalog.hfcc.edu/programs/RESPLUMB.CA/program-requirements-E

Thompson M-TEC (Holland)

CollegeHolland, West Michigan
Area
Holland, West Michigan
Length
Less than 3 months; Fall and Winter classes.
Classroom
Mondays and Wednesdays, 4:30 to 8:30 PM.
Cost
$2,595, which includes the code book and a starter plumbing tool kit.
How to apply
Join the waitlist or schedule a video call on the page.
Gain lifelong skills and get a start on a solid career in less than 3 months.

Read on the program's own site 2026-11-18: mtec.org/commerical-residential/plumbing

Detroit Job Corps Center (pre-apprentice)

OtherDetroit
Area
Detroit
Requirements
High school diploma or equivalent (can be earned at the center); finish introductory courses; pass written and performance tests; meet math and reading requirements.
Pre-apprenticeships are focused on preparing students for a successful experience in a Registered Apprenticeship Program.

Read on the program's own site 2026-11-18: detroit.jobcorps.gov/jobs/plumbing-pre-apprentice

Undated pay is left out on purpose. If a program changed, its own site wins.