Minnesota
Minnesota plumbing apprenticeships: Program Index
11 Minnesota plumbing training programs, each read on its own website.
Checked against official sources on 2026-11-18
When to apply lists each program's application status.

Minneapolis Plumbers JJATC (UA Local 15)
Union (UA)Minneapolis and St. Cloud areas (central Minnesota, Local 15 jurisdiction); training center in Maple Grove
- Area
- Minneapolis and St. Cloud areas (central Minnesota, Local 15 jurisdiction); training center in Maple Grove
- Length
- 5 years with 8,780 on-the-job hours.
- Classroom
- 175 hours of related classroom instruction each year (night school 2 nights a week for 25 weeks a year, 5 to 8:30 pm, September through April; unpaid).
- Cost
- Annual tuition is approximately $700 per year. Every student gets a Chromebook and textbooks at no additional charge.
- Requirements
- Minimum 17 years old; high school diploma or GED (high school seniors can apply and send the diploma by June 30). No set class size; typical class is 40 to 60 apprentices.
- How to apply
- In person only, walk in with no appointment, at the Plumbers Local 15 Training Center, 8625 Monticello Ln N, Maple Grove MN 55369 (computer lab, Room 143). You get an emailed link from Criteria to complete the application and tests on a computer provided there (plan about 1.5 hours) and upload your diploma, transcript or GED. Satisfactory scorers are interviewed and ranked; the Union Office places accepted apprentices with union contractors from March to September.
- Prepares for
- Apprentices are paid on the job under union contractors, and the program says graduation requires both the State of Minnesota and City of Minneapolis plumbing licenses.
The apprenticeship program is for a 5-year period and requires 8,780 on-the-job hours of work.
Read on the program's own site 2026-11-18: training15.com/ · training15.com/future-applicant/ · plumberslocal15.com/training
St. Paul Plumbers and Gasfitters (UA Local 34)
Union (UA)St. Paul area (Local 34 jurisdiction)
- Area
- St. Paul area (Local 34 jurisdiction)
- Length
- 5 years, currently 8,500 hours of on-the-job training, with a probationary period of not more than 500 hours.
- Classroom
- A minimum of 196 hours of related instruction each year.
- Cost
- $25 assessment test fee (DLI also lists a $5 retake fee; the test can be taken three times). Apprentices pay their own union dues and provide their own transportation.
- Requirements
- Minimum assessment scores: Reading 248, Math 250. Typical workday is 8 hours between 7:00 am and 5:00 pm.
- How to apply
- Take the reading and math assessment (walk in Monday and Wednesday 8 am to 4 pm at Workforce Training, room L587, Saint Paul College) and apply at the same time. Applicants who reach the minimum scores are interviewed (usually in October); the interview and test scores are added and applicants are ranked. The list decides placement into the pre-apprenticeship course, and names then go to Local 34 for placement.
- Prepares for
- The program is a registered apprenticeship; related instruction includes plumbing code courses taught with Saint Paul College.
The apprenticeship program itself currently involves 8,500 hours (five years) of on-the-job training and a minimum of 196 hours of related instruction each year.
Read on the program's own site 2026-11-18: plumberslocal34.org/training/apprentice · plumberslocal34.org/ · dli.mn.gov/business/workforce/plumber-apprenticeships
Northern Mechanical and Iron Range JAC (Locals 11 and 589)
Union (UA)Duluth, Iron Range and northern Minnesota (training center 4402 Airpark Blvd, Duluth; evening classes in Duluth and Virginia MN)
- Area
- Duluth, Iron Range and northern Minnesota (training center 4402 Airpark Blvd, Duluth; evening classes in Duluth and Virginia MN)
- Length
- 5 years with 9,000 on-the-job hours.
- Classroom
- 216 hours of related instruction each year. First year classes are 8 hours a day for 5 weeks (40 hours a week); third to fifth year classes are evenings, two or three nights a week, 5 pm start for 3 to 4 hours.
- Cost
- Apprentices only provide a 25-foot tape measure and adjustable pliers; the contractor supplies other tools. Steel-toed boots required. Tuition not stated.
- Requirements
- At least 18 at the time of interview; high school transcripts or GED; copy of birth certificate; physically able to do the work; veterans add a DD-214.
- How to apply
- Request an online account with the JAC (via TradeSchool, Inc. per DLI), wait up to one business day for approval, then complete the online application and upload documents. Interviews follow.
- Prepares for
- registered apprenticeship in the plumbing, pipefitting and HVAC trades.
The apprenticeship program is for a 5-year period and requires 9,000 on-the-job hours of work.
Read on the program's own site 2026-11-18: 11589jatc.com/why-join/ · dli.mn.gov/business/workforce/plumber-apprenticeships
Rochester Plumbers and Pipefitters (UA Local 6)
Union (UA)Rochester and southeastern Minnesota (training center 3111 19th Street NW, Rochester)
- Area
- Rochester and southeastern Minnesota (training center 3111 19th Street NW, Rochester)
- Length
- Five wage steps (1st to 5th year) are posted; total hours not stated on the pages read.
- Cost
- Apprentice tuition is paid per semester through a link on the site; amount not stated. No application fee (DLI).
- Requirements
- Must be 18; completed application by the deadline; able to perform the work physically; may need a physical exam and drug test before employment; own transportation to job and classroom.
- How to apply
- Contact the training coordinator (Jeremy Thompson, 507-288-4172) or request a tour of the training center; apply by the deadline.
- Prepares for
- registered apprenticeship listed by DLI.
Must be 18 years of age.
Read on the program's own site 2026-11-18: ualocal6.org/apprentices/ · dli.mn.gov/business/workforce/plumber-apprenticeships
ABC of Minnesota and North Dakota
ABCMinnesota (employer sponsored, merit shop)
- Area
- Minnesota (employer sponsored, merit shop)
- Length
- Three to five years; plumbing is one of the trades in the state approved program. A Plumbing Trade Schedule is linked on the page.
- How to apply
- A participating contractor hires you and enrolls you in the Construction Education Foundation of MN apprenticeship program. Applicants cannot get in without a sponsoring company, and the company must be an ABC of Minnesota/North Dakota member. Current openings are posted by participating companies.
- Prepares for
- in principle: a state approved apprenticeship program, with on-the-job training and classroom instruction.
Simply put, a participating contractor hires you, and then enrolls you in the CEF of Minnesota Apprenticeship Program.
Read on the program's own site 2026-11-18: mnabc.com/Education-Training/Apprentice-Resources
Minnesota PHCC Apprenticeship
PHCCMinnesota (online; employer must provide on-the-job training)
- Area
- Minnesota (online; employer must provide on-the-job training)
- Length
- Each course equals one year of classroom instruction; on-the-job training must be coordinated with a participating employer.
- Classroom
- 156 hours per course (one course per apprenticeship year).
- Cost
- $1,550 annually; required books are extra.
- How to apply
- Register online on the MN PHCC page; the apprentice must arrange on-the-job training with a participating employer.
It is the apprentice's responsibility to confirm that Related Technical Instruction is accepted in their state.
Read on the program's own site 2026-11-18: mnphcc.com/plumbing-apprenticeship/
Hennepin Technical College
CollegeBrooklyn Park (daytime) and Eden Prairie (evening)
- Area
- Brooklyn Park (daytime) and Eden Prairie (evening)
- Length
- Program starts in the fall term only. Credits and length are not stated on the page (the state's DEED school list shows a 30 to 59 credit award of one to two years, and a shorter 1 to 29 credit award).
- How to apply
- Apply through the college's admissions application; course search and registration through eServices.
The State of Minnesota requires an additional 7,000 OJT (On-the-Job) work hours to be eligible to apply for Plumbing licensure.
Read on the program's own site 2026-11-18: hennepintech.edu/program/plumbing/
Minnesota West (Pipestone)
CollegePipestone campus (southwest Minnesota)
- Area
- Pipestone campus (southwest Minnesota)
- Length
- Diploma: 2 semesters full time, 33 credits. Certificate: 2 semesters full time, 9 credits.
- Cost
- Diploma typically $3,912.15 per semester; certificate typically $2,134 for the program (as stated on the page).
- How to apply
- Apply to the college; see Tuition and Fees and Course Catalog links on the page.
Graduates will be ready to enter the field as apprentices.
Read on the program's own site 2026-11-18: mnwest.edu/academics/all-programs/plumbing-technology.php
M State (Moorhead)
CollegeMoorhead campus (Fargo-Moorhead area)
- Area
- Moorhead campus (Fargo-Moorhead area)
- Length
- Diploma, 36 credits, includes an internship in the field.
- Requirements
- High school transcript; acceptance to M State does not guarantee a seat.
- How to apply
- Apply to M State, then send high school and college transcripts to records@minnesota.edu. Seats are first come, first served by registering for classes.
Graduates are eligible for applicable hours on their apprenticeship card.
Read on the program's own site 2026-11-18: minnesota.edu/programs-and-degrees/plumbing-technology
Northland Community and Technical College
CollegeEast Grand Forks (northwest Minnesota)
- Area
- East Grand Forks (northwest Minnesota)
- Length
- Diploma, 34 credits, about nine months.
- How to apply
- Free online application; admissions representative Amanda Hoglo, 218.683.8542.
Class credits also count towards your apprenticeship hours.
Read on the program's own site 2026-11-18: northlandcollege.edu/academics/programs/construction-plumbin
Northwest Technical College (Bemidji)
CollegeBemidji campus (northern Minnesota)
- Area
- Bemidji campus (northern Minnesota)
- Length
- Diploma, one year, 37 credits, on campus.
- How to apply
- Apply, visit or request information through the college page.
NTC Plumbing Technology course credits count toward state apprenticeship hours.
Read on the program's own site 2026-11-18: ntcmn.edu/career-paths/building-systems/plumbing-technology/
Undated pay is left out on purpose. If a program changed, its own site wins.