Oklahoma
Oklahoma plumbing apprenticeships: Program Index
10 Oklahoma plumbing training programs, each read on its own website.
Checked against official sources on 2026-11-18
When to apply lists each program's application status.

UA Local 344 (Oklahoma City)
Union (UA)Oklahoma City metro area
- Area
- Oklahoma City metro area
- How to apply
- The pages read give a short call back form ('schedule a call') to reach Local 344; no application steps or deadlines are posted on the pages read.
Apprentices working through the Local 344 training program in the Oklahoma City region learn how to: Install and maintain piping systems
Read on the program's own site 2026-11-18: ua344.org/ · ua344.org/2026/03/07/build-a-career-in-the-pipe-trades-2/ · ua344.org/2026/06/13/the-union-advantage-for-plumbers/
Tulsa Pipe Trades Training School
Union (UA)Tulsa area, 8602 E 46th St, Tulsa (address from a third party listing; phone numbers on the site)
- Area
- Tulsa area, 8602 E 46th St, Tulsa (address from a third party listing; phone numbers on the site)
- Length
- 5 years
- Requirements
- At least 18; high school graduate or GED; at least one year of high school math with a passing grade or one post high school math course; willing to take a drug test. Missing documents mean the application is marked incomplete and disqualified.
- How to apply
- Request an application by phone, in person or by email, then return it with proof of age (birth certificate or driver license), high school transcript or GED scores, DD214 if a veteran, and any college or vocational transcripts. Complete applicants are mailed a notice for the next interview session; interviews are not rescheduled. Selected applicants must pass a drug test and be able to report to work within 5 days.
- Prepares for
- in part: the plumbing page says a plumber in Oklahoma must be registered as an apprentice with the state or hold a journeyman license. The pages do not say the school files the CIB registration for you.
In order to legally work in the state of Oklahoma, a plumber must be registered as an apprentice with the state or hold a journeyman license.
Read on the program's own site 2026-11-18: tulsapipetrades.org/ · tulsapipetrades.org/plumbing-apprenticeship/ · tulsapipetrades.org/application-procedures/
Tulsa Tech (Lemley campus)
CollegeTulsa
- Area
- Tulsa
- Length
- 18 months for adults (morning or afternoon session, Monday to Friday, 3 hours a day, August start); 2 school years for high school students.
- Classroom
- Hours not stated on the page; the CIB approved schools list shows 1,000 hours for Tulsa Technology Center plumbing (Tulsa Tech) and a separate 250 hour course.
- Cost
- Adult tuition $4,000; books estimate $0; tools, supplies and certifications estimate $540. High school students: tuition $0, tools and supplies about $130.
- Requirements
- Adults and high school students may attend; no further requirement stated on the page.
- How to apply
- Register an account, visit the program, submit academic records; help at the Lemley Memorial Campus client service center or (918) 828-5000.
- Prepares for
- the page says it helps students develop the skills to secure an apprenticeship and prepare for the journeyman license; the CIB lists it as approved school credit.
Develop the skills to secure your Apprenticeship and prepare to earn your Journeyman license.
Read on the program's own site 2026-11-18: tulsatech.edu/full-time-programs-25-26/architecture-and-cons
Central Tech (Sapulpa)
CollegeSapulpa and the Creek County area
- Area
- Sapulpa and the Creek County area
- How to apply
- Apply Now link on the page goes to the school's PowerSchool registration.
- Prepares for
- the page says the class prepares you for an apprenticeship and that Central Tech qualifies for two years of the three years of apprentice work before the journeyman exam; it also says to apply for the endorsed apprentice card right away.
Typically, you would have to work in the field as an apprentice for three years before becoming a journeyman. Central Tech qualifies for two-years of work.
Read on the program's own site 2026-11-18: centraltech.edu/o/ctc/page/plumbing
Mid-Del Technology Center
CollegeMidwest City and Oklahoma City east side
- Area
- Midwest City and Oklahoma City east side
- Requirements
- An Entrance Requirement section exists but did not load.
- How to apply
- Apply online link on the page; school phone (405) 739-1707, adult career development (405) 739-1712.
- Prepares for
- the page says students earn up to 2 years of CIB credit and obtain an apprentice card.
Learn the entry level skills needed for entry-level Plumbing technicians while earning up to 2 years of CIB credit and obtaining an apprentice card.
Read on the program's own site 2026-11-18: middeltech.com/o/mdtc/page/plumbing-apprentice-technology
Canadian Valley Technology Center
CollegeEl Reno, Chickasha and Yukon area
- Area
- El Reno, Chickasha and Yukon area
- Length
- About 2 years part time or 1 year full time (adult evening program, Monday to Thursday, 3:25 to 6:15 p.m. or 7:15 to 10:05 p.m.; the full time option 3:25 to 10:05 p.m. if space is available).
- Classroom
- 1,000 clock hours: Introduction to Plumbing Tools and Materials 100, Calculations and Drawings 100, Plumbing Utilities 100, Rough-In for Final Phase 360, Plumbing System Repair and Diagnosis 340.
- Cost
- Program costs and book list are on a linked sheet that was not read; no amount recorded.
- Requirements
- Adults only (evening program).
- How to apply
- Apply Now on the site; El Reno evening counselor Kasey Franks, 405-422-2315; El Reno campus 6505 E Highway 66, 405-262-2629.
- Prepares for
- page says it may lead to licensure as a journeyman and students can earn up to two years of credit toward apprenticeship requirements with the CIB.
Students also have the opportunity to earn up to two years of credit toward apprenticeship requirements with the Oklahoma Construction Industries Board
Read on the program's own site 2026-11-18: cvtech.edu/programs/plumbing/
Indian Capital Technology Center
CollegeEastern Oklahoma (Coweta, Sallisaw)
- Area
- Eastern Oklahoma (Coweta, Sallisaw)
- Requirements
- High school juniors and seniors and adults may attend.
After completion, students may continue training toward their journeyman licensure.
Read on the program's own site 2026-11-18: ictech.edu/o/ictc/page/plumbing
Wes Watkins Technology Center
CollegeWetumka and the Hughes, Seminole and Pottawatomie county area
- Area
- Wetumka and the Hughes, Seminole and Pottawatomie county area
- Length
- 960 hours total curriculum (eight 120 hour courses).
- Classroom
- 960 total, including Construction Technology Plumbing, Plumbing System Planning and Design, Plumbing System Repair and Diagnosis, and Building and Facilities Maintenance Plumbing. The CIB approved schools list shows 375 hours for Wes Watkins; confirm the substitution rate with the CIB.
- Cost
- Tuition in district $2,880; out of district $3,840; fees $2,386.
- How to apply
- Application Process link on the page; Wetumka campus 7892 Highway 9, 405-452-5500.
Facility Maintenance are responsible for keeping buildings in proper working condition.
Read on the program's own site 2026-11-18: wwtech.edu/facility-maintenance-tech-plumbing
Tri County Tech (Bartlesville)
CollegeBartlesville and Washington County
- Area
- Bartlesville and Washington County
- Length
- 60 total hours; next listed session January 11, 2027 to March 31, 2027, Monday and Wednesday 6:00 to 9:00 p.m.
- Classroom
- 60 total hours (the CIB list shows a 260 hour course for Tri-County Tech).
- Cost
- Down payment due at enrollment; amounts are on a linked cost sheet not read.
- How to apply
- Request Info or Apply Now on the page; Admissions@TriCountyTech.edu or 918.331.3333.
Program Length: 60 Total Hours Program Instructor: Eddie Mason
Read on the program's own site 2026-11-18: tricountytech.edu/program/construction-technology-plumbing/
Oklahoma Technical College (Tulsa)
CollegeTulsa (4444 S Sheridan Rd, per third party search result; branch of Community Care College)
- Area
- Tulsa (4444 S Sheridan Rd, per third party search result; branch of Community Care College)
- Length
- 12 months, evening classes on campus (just under 1 year, 50 weeks).
- How to apply
- Apply Today link on the page (online application); request info form.
- Prepares for
- the page says the program takes less than one year and the time counts for two years of experience toward a journeyman license.
your time spent at our college counts for two years' experience towards a journeyman license.
Read on the program's own site 2026-11-18: oklahomatechnicalcollege.com/plumbing/
Undated pay is left out on purpose. If a program changed, its own site wins.