Study page ยท Drains and vents

X-ray the drain and vent system

Tap the pipes, run the water, cut a vent and watch the trap fail. Every rule here comes word for word from the plumbing codes, with the section number, so you know exactly what the exam is testing.

Code book
0 of 7stations done
  1. 1X-ray
  2. 2Trap arm lab
  3. 3Vent sizer
  4. 4Roof check
  5. 5Test day
  6. 6Inspector
  7. 7Quick check
01

The X-ray

Tap any numbered point. Then press Run water. Then cut the vent and run it again.

ATTICBATHROOMUNDER THE SLAB LAVATORY FLOOD LEVEL RIM WATER CLOSET 123456789
02

Trap arm lab

A 1 1/2 inch trap. Slide the vent along the trap arm and watch the code call it.

03

Vent sizer

Pick the drain. Then pick the smallest individual vent the code allows.

04

Roof check

The vent comes up near an openable window. Move it until it passes.

05

Test day

Before the drywall goes up, the drain and vent piping gets tested. Pick a test and run it.

0 min
06

Inspector mode

This rough-in has 4 code violations. Tap each one. Wrong taps cost you nothing but pride.

FLOOD LEVEL RIM OPENABLE WINDOW

0 of 4 found

07

Flip cards, then the quick check

Six words the exam loves. Tap a card to flip it.

Your study sheet

Finish all 7 stations to complete this page.