Washington

Washington plumbing apprenticeships: Program Index

9 Washington plumbing training programs, each read on its own website.

Checked against official sources on 2026-11-18

When to apply lists each program's application status.

An instructor brazes copper while apprentices watch at a training center

Seattle Area Pipe Trades (UA Local 32)

Union (UA)Seattle, King County and the Seattle area; training center in Renton
Area
Seattle, King County and the Seattle area; training center in Renton
Length
Two paths. Residential path: 3 years, 6,000 work hours. Commercial path: 5 years, 10,000 work hours. The program standards list Plumber at 10,000 hours and Housing Plumber at 6,000 hours.
Classroom
Residential path: 432 school hours minimum. Commercial path: 1,080 school hours minimum.
Requirements
18 or older; high school graduate or GED; resident of Washington State; physically capable of the work; valid driver's license; negative drug test. Plumbers typically begin as Helper and must get a plumber trainee card and keep it current.
How to apply
Apply year round through the portal at SAPT.ORG after submitting 4 prerequisites: a copy of a valid US driver's license; high school transcript or GED scores (not the diploma); one math option (community or technical college placement test showing you can enroll in Math 90 or higher, or a B or better in an algebra class within one year of applying); and a negative non-DOT urinalysis (5 or 10 panel, valid 15 days). Then a panel interview of 15 minutes; lists are ranked by score and approved by the committee, and accepted applicants are contacted 4 to 6 weeks after interviews. Helper or tradesman jobs may be offered when apprentice spots are full. Office: 595 Monster Rd SW, Suite 100, Renton, WA 98057, (425) 271-5900.
Prepares for
Graduation requirements on the plumber page: residential path, PL02 Washington plumber license and Seattle Gas Piping Mechanic License; commercial path, PL01 Washington plumber license, Seattle Gas Piping Mechanic License and the UA STAR exam. (The page prints these as PLO 2 and PLO 1.)
A person can apply for an apprenticeship with us year round.

Read on the program's own site 2026-11-18: seattlepipetrades.org/apprenticeship-programs/plumber · seattlepipetrades.org/how-to-apply · ualocal32.com/careers-trades/plumbers/

Greater Western Washington Pipe Trades (UA Local 26)

Union (UA)Northwest Region: Snohomish, Skagit, Island and Whatcom counties (Burlington). Southwest Region: Pierce, Thurston, Lewis, Grays Harbor, Pacific, Kitsap, Mason, Cowlitz and Skamania counties (Lacey)
Area
Northwest Region: Snohomish, Skagit, Island and Whatcom counties (Burlington). Southwest Region: Pierce, Thurston, Lewis, Grays Harbor, Pacific, Kitsap, Mason, Cowlitz and Skamania counties (Lacey)
Length
10,000 hours, about 5 years. Trades offered: steamfitting, commercial and service plumbing, HVAC/refrigeration.
Requirements
At least 18 at the time of application; Washington State driver's license; proof of high school diploma or GED; resume, certifications, letters of recommendation and examples of previous projects; DD-214 if applicable; completion of the apprenticeship interview.
How to apply
Use the Apply button for your region. After the application is processed you get notice of a required eSkills test, then a Committee Interview, then you are placed on an eligibility list that stays valid two years. A 9 panel non-DOT drug test with negative results is required before dispatch. Southwest Region: 8501 Zenith Court NE, Lacey, WA 98516. Northwest Region: 780 Chrysler Drive, Burlington, WA 98233.
We are a 10,000 hour program; which equates to approx. 5 years to complete.

Read on the program's own site 2026-11-18: gwwpt.org/ · gwwpt.org/future_apprentice/

UA Local 44 JATC (Spokane)

Union (UA)Eastern Washington and North Idaho (Local 44); training center in Spokane
Area
Eastern Washington and North Idaho (Local 44); training center in Spokane
Length
5 years. Registered standards WSATC-0053 (last amended July 17, 2025) cover 5 trades with 8,000 to 10,000 program hours.
Cost
Tuition not stated on the pages read. The Accuplacer test and drug test are at the applicant's expense.
Requirements
18 or older; valid driver's license and reliable transportation; high school graduate or GED including one year of algebra and one year of plane geometry; able to perform the trade's duties with or without reasonable accommodation; score at least 240 on the arithmetic portion of the Next Generation Accuplacer; negative non-DOT drug test within 10 days of the first interview.
How to apply
Pick up the application packet in person at the union training center (Spokane Community College's apprenticeship page lists 3915 E Main, Spokane, WA 99202, 509-624-5258). Return a complete packet within 30 days: application, complete high school transcript (and any college transcripts) or official GED copy, birth certificate copy, driver's license copy. Qualified applicants are interviewed by the joint committee, ranked, and dispatched into the trade in rank order.
Interviews are held twice a year, in May and November.

Read on the program's own site 2026-11-18: ua44.org/ Basic Requirements page · ua44.org/ Do You Have What it Takes page · ua44.org/ Standards of Apprenticeship page

PHCC of Washington Apprenticeship

PHCCOnline, Washington and other states; PHCC of Washington is in Renton
Area
Online, Washington and other states; PHCC of Washington is in Renton
Length
4 years of online courses. Apprentices must also complete on-the-job training with a participating employer.
Classroom
576 related technical instruction hours over four years (144 hours per year). The same page also says each course equals one year of classroom instruction at 156 hours.
Cost
Enrollment fee $2,295 per year. Military discount: 15 percent with promo code Military15.
How to apply
Enroll online through the Enroll now button on the plumbing apprenticeship page. Apprentices can be registered in the Department of Labor RAPIDS system based on contractor needs. On the job training must be coordinated with a participating employer.
It is the apprentice's responsibility to confirm that Related Technical Instruction is accepted in their state.

Read on the program's own site 2026-11-18: phccwa.org/plumbing-apprenticeship

PHCC of Washington Pre-Apprentice course

PHCCOnline
Area
Online
Length
Self paced, 6 modules, must be finished within 4 months (120 days); most students finish in under 10 hours.
Classroom
Not applicable; online modules (Foundations, Safety, Science and Math, Plumbing Systems and Products, Troubleshooting Fixtures, Troubleshooting Gas).
Cost
$29
How to apply
Enroll online on the course page.
Cost: $29

Read on the program's own site 2026-11-18: phccwa.org/plumbing-pre-apprentice

PHCC of Washington Fast Track (service and repair)

PHCCOnline
Area
Online
Length
Self paced, 34 training modules, most students finish in 9 to 12 months.
Cost
$2,899 per student for employees of PHCCWA member companies; $3,899 for all others. Military discount: 15 percent with promo code Military15.
Requirements
Aimed at new plumbing trainees and entry level service and repair employees; no entry test stated.
How to apply
Employers enroll employees online; year round open enrollment.
Cost: $2899 per student for employees of PHCCWA members; $3899 for all others

Read on the program's own site 2026-11-18: phccwa.org/fast-track-to-service-plumbing

Perry Technical Institute

CollegeYakima, WA (main campus 2011 W. Washington Ave, Yakima; 509-453-0374)
Area
Yakima, WA (main campus 2011 W. Washington Ave, Yakima; 509-453-0374)
Length
1 year program with an externship in the last six weeks.
Cost
Tuition not stated on the program page (Net Price Calculator linked on the site).
How to apply
Schedule a tour from the program page; enrollment steps are on the Enrolling at Perry page (not read).
the Washington State Department of Labor & Industries may recognize this one year of training toward the (01) journey-level certification.

Read on the program's own site 2026-11-18: perrytech.edu/programs/plumbing-technician

Spokane Community College (pre-apprenticeship)

CollegeSpokane Valley; Apprenticeship and Journeyman Training Center, 2110 N. Fancher Way
Area
Spokane Valley; Apprenticeship and Journeyman Training Center, 2110 N. Fancher Way
Length
11 weeks, offered fall, winter and spring quarters; Monday to Thursday 7:30 a.m. to 3:00 p.m.; no part time option.
Cost
Tuition $25, which includes certificate, lab and testing fees and textbooks; alternate funding assistance is available.
Requirements
High school diploma or GED (exceptions possible if close); completed ESL 5 (if close, contact them); 18 or older.
How to apply
Attend an information session (9:00 a.m. at the Apprenticeship Center) or call 509-533-7221 or email ABEinquiry@scc.spokane.edu to enroll.
STP partners with 18 apprenticeship programs through Spokane Community College's Apprenticeships

Read on the program's own site 2026-11-18: scc.spokane.edu/Become-a-Student/I-Need-Basic-Education/Shor · scc.spokane.edu/Become-a-Student/Apprenticeships/Programs

Clover Park Technical College

CollegeLakewood, WA (Pierce County)
Area
Lakewood, WA (Pierce County)
Length
45 credits, 3 quarters.
Cost
Tuition not read; the catalog excerpt gives no price for this certificate.
Requirements
Completion of the first quarter courses CONST 102, 104, 106 and 144; physical requirements include lifting at least 50 lbs and working in confined spaces.
How to apply
Apply through the college admissions office (steps not read). Prerequisite: first quarter courses CONST 102, 104, 106 and 144.
The Residential Plumbing Certificate is a comprehensive 45-credit program

Read on the program's own site 2026-11-18: cptc.edu/sites/default/files/Academic%20Catalog%202025-2026.

Undated pay is left out on purpose. If a program changed, its own site wins.